Filter
Top Products
3 – SANbox SSP Management GUI Reference
Navigating the SANbox SSP Management GUI
3-8 SN0054628-00 A
Q
In addition, the following settings can be changed on the System screen:
NOTE: For all the Force Fabric, Initiator, Target, and Speed settings, you must
click Apply before the settings are saved. The Initiator, Target, and Max
Frame Size settings take effect only after rebooting the SANbox SSP.
Force Fabric: selecting this box forces this port to operate in Fabric Mode Only (no
loop support).
Initiator: selecting this box enables initiator (storage back-end) operations through
this port.
Target: selecting this box enables target (front-end) operations through this port.
Speed: changing this box enables you to force the speed operation of the SANbox
SSP port.
Enabling and Disabling Ports
NOTE: Enabling and Disabling ports takes effect immediately after clicking the
Enable/Disable buttons.
Disable: click Disable to disable a port.
Enable: click Enable to enable a port.