Renesas M16C PC4701 Network Card User Manual


 
7 Windows/Dialogs
7.7.10.2 Select AND(Same Time)
Change the Combination group to "AND (Same Time)". Next, check (turn on) an event in the event
specification area that you want to use. No pass counts can be specified (fixed to 1).
7.7.10.3 Select State Transition
Change the Combination group to "State Transition". The Detail... button included in the
Combination group becomes useful, so click that button. This opens the State Setting window. In this
window, State Transition can be specified using a state transition diagram or sequentially. A state
time-out time can also be specified.
Specification by a state transition diagram Use the state transition diagram of the State Transition
group. Click any button here to select the event you want to use. For the button above the arrow,
specify the event necessary to go to the state indicated by the arrow. For the button above the state
(elliptical display part), specify the event necessary to reset the pass count of each state and reset the
time count of that state. Pass counts can be specified from the popup menu that appears when
selecting an event.
Example: After conditions are met in order of events A1 and A2, event A3 is not established and event
A4 is established
143