Renesas M16C PC4701 Network Card User Manual


 
7.14.9 Display the Cycle Handler Status
In the MR window, select Popup Menu - [Mode] -> [Cyclic Handler].
7.14.9.1 Display the Cycle Handler Status(When the realtime OS is MRxx conformed to uITRON
specifications V.3.0.)
All the cycle handlers defined in the configuration are listed in the order of ID number. The function
of each item is listed below. (When the realtime OS is MRxx conformed to uITRON specifications
V.3.0.)
Item Contents
ID ID No. of cycle handler
StaAddr Starting address of cycle handler
(name) Name of cycle handler
interval Interrupt interval
count Interrupt count
Status Activity status of cycle start handler
The following are displayed in the Status area:
TCY_ON Cycle handler enabled
TCY_OFF Cycle handler disabled
202