Filter
Top Products
14
GETTING ACQUAINTED
Loading Other Media
Use the following procedures to load envelopes, transparencies, and label paper.
To load envelopes
Load up to 5 envelopes at a time, using the same procedure for loading
small size paper on page 12.
• Insert envelopes print side up with the stamp
position as shown.
• Envelope flaps should be securely folded down, so the envelope is “closed”.
This is especially important when printing on envelopes with adhesive on the
flaps, because heat generated during the printing process can cause the adhe-
sive to melt and get on rollers.
Note
Refer to the paper select operation on page 13.
To load transparencies
Load only one transparency at a time, using the plain paper loading proce-
dure on page 10 for large transparencies, and the small paper loading proce-
dure on page 12 for small transparencies.
Note
Refer to the paper select operation on page 11 for large transparencies or page
13 for small ones.
To load label paper
Load only 10 sheets of label paper at a time, using the plain paper loading
procedure on page 10.
Note
Refer to the paper select operation on page 11.
Flap