Filter
Top Products
24
PRINTING
To install the printer driver under Windows
®
3.1x
1
Quit all applications except Program Manager.
• Press [Alt] + [Tab] to display the Task List window.
• Select the application you want to quit.
• Click [End Task] and then press [Enter] to quit the program.
• Repeat the above steps as many times as necessary to quit all applications that
are running.
2
The next step you should perform depends on whether you are install-
ing from diskette.
<
To install from diskette, follow these steps
>
• Insert the diskette into your computer’s floppy disk drive (usually named A: or B:).
• On the Program Manager [File] menu, click [Run].
• Type X:INSTALL, replacing “X” with the name of the drive from which
you are installing, and then click [OK].
• Follow the instructions that appear on your computer screen. Note that
installation takes a few minutes. After it is complete, remove the diskette from
your computer’s drive.
New Hardware Found Window
Perform the following steps when the New Hardware Found window appears
after you first install the driver.
1
Click [Do not install a driver (Windows will not prompt you again).]
2
Click [OK].
Note
If the above window does not appear after you first install the driver, check to
make sure that the printer driver was installed properly and that you are using a
suitable cable to connect the machine to your computer.
The above dialog box will not appear if you partially or completely installed this
printer driver before.