Filter
Top Products
36
COPYING
5
Stretch the extend tray that supports the
originals.
Originals that do not meet the following requirements can cause paper misfeeds,
and even damage the machine.
■ Requirements
• Thickness 0.05mm to 0.2mm (0.002" to 0.08")
• Weight 60 to 90 g/m
2
(16lb to 24lb)
• Clear markings Markings on the originals must be clear to be read
correctly.
• Uniform page size All pages should be the same size.
• Page condition Avoid using originals that are bent, curled, damaged,
or stapled, and originals printed on coated paper,
carbon paper, or photographic paper.
6
Press to perform the copy op-
eration.
Note
• If an original becomes misfed during feed-
ing by the ADF, press to stop the op-
eration. Refer to“Clearing a Paper
Misfeed” on page 47.
• We recommend you use text mode when
copying with the ADF.
• We recommend you copy photo originals
from the exposure glass for best results.