Filter
Top Products
79
COPYING
5. COPYING
5
Make sure the upper tray extension is
pulled out.
Originals that do not meet the following requirements can cause paper misfeeds,
and even damage the machine.
■ Requirements
• Thickness 0.05mm to 0.2mm (0.002" to 0.08")
• Weight 60 to 90 g/m
2
(16lb to 24lb)
• Clear markings Markings on the originals must be clear to be read
correctly.
• Uniform page size All pages should be the same size.
• Page condition Avoid using originals that are bent, curled, damaged,
or stapled, and originals printed on coated paper,
carbon paper, or photographic paper.
6
Press to perform the copy opera-
tion.
Note
• If your original jams while being fed into
the ADF, press to cancel the opera-
tion. See page 93 for how to clear the jam.
• We recommend you use Text mode when
copying with the ADF.
Note
We recommend you copy photo originals from
the exposure glass for best results.
b(GB)6.5_Chapter 05_p76-81 99.8.3, 1:17 PM79