Filter
Top Products
58
TECHNICAL REFERENCE
02:0010 Ç000
Selecting 300 dpi or 600 dpi
Set the printer to 300 dpi if the designated output is not obtained when
printing using a DOS application compatible with the 300 dpi PCL printer.
Prt Help List
O
K
3 User Param.
1
Press .
2
Press
or
until “3
User Param.” appears. The messages
change in the following order.
3
Press and press to
move the flashing block cursor until it
appears in the position shown in the
illustration to the right
.
4
Press to change the setting to 1 or
0, as desired.
Display Heater status
02:0010 0000 600 dpi (default setting)
02:0010 1000 300 dpi
Note
The bits other than the one highlighted in the illustration are unrelated to this
setting.