Filter
Top Products
41
FAXING
4. FAXING
3
Set your document in one of the follow-
ing ways:
• In the ADF
Carefully insert the document stack face-down
into the ADF until the display changes to “Dial
number”.
• Make sure this message appears. If it does not,
your document will not be scanned from the ADF.
• Lift the platen cover 1 then place the first page
of your document face-down on the exposure
glass aligning it with the arrow mark on the scale
2. Then close the platen cover 3.
4
Adjust the scan settings if necessary.
• E.g. if your document is a photograph, press the
Original Type Select key twice to select Photo 1.
Setting Use for:
[Text] Standard text
[Text Fine] Detail text
[Photo1] Photographs
[Photo2] Mixed text and photographs
☛
To select the Resolution/Photo setting, see
page 76.
Dial number
2
1
3
Dial/Set orig.
b(GB)6.5_Chapter 04_p40-46 99.8.3, 1:15 PM41