Ricoh 106 Copier User Manual


 
25
3. PRINTING
AND SCANNING
3. PRINTING AND SCANNING
When connected to a compatible PC, you can use this machine as a high
performance laser printer and black and white scanner.
Important!
Make sure that your PC parallel port is set to ECP. If it is not, please consult your
PC manual on how to change it.
Note
For information on PC hardware and software requirements, please read the
README file on the CD.
Printer drivers are provided for both Windows
®
95/98 and Windows
®
3.1, but
the scanning feature requires Windows
®
95/98.
Setting up
Before you can start printing and scanning you need to the following if you
have not done so already:
Connect the machine to your PC
Install the software drivers on your PC
Installing the Software Drivers
Follow the steps below to install the printer/scanner drivers on your PC.
1
Switch the machine on.
2
Make sure the machine is connected to your PC and paper is loaded in
the upper paper tray.
Connecting to a computer, see page 6.
Loading Paper, see page 11.
3
Insert the provided software CD into your CD-ROM drive.