Filter
Top Products
61
TECHNICAL REFERENCE
7. TECHNICAL
REFERENCE
Selecting Toner Saving Mode
The toner saving mode status has two settings.
3 User param.
02:0010 0Ç00
Prt Help List
O
K
1
Press . “Prt Help List” appears.
2
Press or until “3
User Param.” appears. The messages
change in the following order.
3
Press and press to
move the flashing block cursor until it
appears in one of the positions shown
in the illustration to the right.
Note
The bits other than the one highlighted in the
illustration are unrelated to this setting.
4
Press to change the bit setting to
1 or 0, as desired.
Display Heater status
02:0010 0000
Off (Default)
02:0010 0100 On (Density will be lighter)
5
Press .
Note
• To cancel this change, press or
instead of . “Please wait”
and “Not Registered” appear on the display.
• Do not carry out any operations while
“Registered” appears on the display.
Please wait
Registered
100% 01