Filter
Top Products
24
GETTING ACQUAINTED
SIMM
4
Carefully lift out the currently installed
SIMM board.
5
Angle the new SIMM board as shown in
the illustration, and insert it down into
the slot. Gently rock it back and forth
until you hear it snap into place.
Important!
Make sure the SIMM board is oriented cor-
rectly when you insert it into the slot.
6
Make sure the hooks on the sides of the
SIMM board snap securely into place.
7
Replace the cover by inserting its tabs
into the holes provided, as shown in
the illustration.