SMC Networks SMC8708L2 Switch User Manual


 
C
ONFIGURING
THE
S
WITCH
3-74
CLI – Use the snmp-server view command to configure a new view. This
example view includes the MIB-2 interfaces table, and the wildcard mask
selects all index entries.
User Authentication
You can restrict management access to this switch and provide secure
network access using the following options:
User Accounts – Manually configure management access rights for
users.
Authentication Settings – Use remote authentication to configure
access rights.
HTTPS Settings – Provide a secure web connection.
SSH Settings – Provide a secure shell (for secure Telnet access).
Port Security – Configure secure addresses for individual ports.
802.1X – Use IEEE 802.1X port authentication to control access to
specific ports.
Console(config)#snmp-server view ifEntry.a 1.3.6.1.2.1.2.2.1.1.*
included 4-161
Console(config)#exit
Console#show snmp view 4-162
View Name: ifEntry.a
Subtree OID: 1.3.6.1.2.1.2.2.1.1.*
View Type: included
Storage Type: nonvolatile
Row Status: active
View Name: readaccess
Subtree OID: 1.3.6.1.2
View Type: included
Storage Type: nonvolatile
Row Status: active
View Name: defaultview
Subtree OID: 1
View Type: included
Storage Type: nonvolatile
Row Status: active
Console#