Filter
Top Products
C
OMMAND
L
INE
I
NTERFACE
4-12
Command Groups
The system commands can be broken down into the functional groups
shown below
.
Esc-D Deletes from the cursor to the end of the word.
Esc-F Moves the cursor forward one word.
Delete key or
backspace key
Erases a mistake when entering a command.
Table 4-4 Command Group Index
Command Group Description Page
Line Sets communication parameters for the serial port
and Telnet, including baud rate and console time-out
4-14
General Basic commands for entering privileged access mode,
restarting the system, or quitting the CLI
4-26
System
Management
Controls system logs, system passwords, user name,
browser management options, and a variety of other
system information
4-33
Flash/File Manages code image or switch configuration files 4-86
Authentication Configures logon access using local or remote
authentication; also configures port security and
IEEE 802.1X port access control
4-94
Access Control
List
Provides filtering for IP frames (based on address,
protocol, TCP/UDP port number or TCP control
code) or non-IP frames (based on MAC address or
Ethernet type)
4-117
SNMP Activates authentication failure traps; configures
community access strings, and trap managers
4-150
Interface Configures the connection parameters for all
Ethernet ports, aggregated links, and VLANs
4-169
Table 4-3 Keystroke Commands (Continued)
Keystroke Function