![](http://pdfasset.owneriq.net/5/87/5875d4be-282b-42bc-b125-337cedb21b7d/5875d4be-282b-42bc-b125-337cedb21b7d-bg4a.png)
C
ONFIGURING
THE
S
WITCH
3-22
Manual Configuration
Web – Click System, IP Configuration. Select the VLAN through which
the management station is attached, set the IP Address Mode to “Static.”
Enter the IP address, subnet mask and gateway, then click Apply.
Figure 3-6 IP Interface Configuration - Manual
CLI – Specify the management interface, IP address and default gateway.
Using DHCP/BOOTP
If your network provides DHCP/BOOTP services, you can configure the
switch to be dynamically configured by these services.
Console#config
Console(config)#interface vlan 1 4-170
Console(config-if)#ip address 10.1.0.253 255.255.255.0 4-279
Console(config-if)#exit
Console(config)#ip default-gateway 10.1.0.254 4-280
Console(config)#