SMC Networks SMC8708L2 Switch User Manual


 
C
OMMAND
L
INE
I
NTERFACE
4-10
Line Configuration - These commands modify the console port and
Telnet configuration, and include command such as parity and
databits.
VLAN Configuration - Includes the command to create VLAN
groups.
Multiple Spanning Tree Configuration - These commands configure
settings for the selected multiple spanning tree instance.
To enter the Global Configuration mode, enter the command configure
in Privileged Exec mode. The system prompt will change to
“Console(config)#” which gives you access privilege to all Global
Configuration commands.
To enter the other modes, at the configuration prompt type one of the
following commands. Use the exit or end command to return to the
Privileged Exec mode.
Console#configure
Console(config)#
Table 4-2 Configuration Command Modes
Mode Command Prompt Page
Line line {console | vty} Console(config-line)# 4-14
Access
Control
List
access-list ip standard
access-list ip extended
access-list ip mask-precedence
access-list mac
access-list mac
mask-precedence
Console(config-std-acl)
Console(config-ext-acl)
Console(config-ip-mask-acl)
Console(config-mac-acl)
Console(config-mac-mask-acl)
4-117
Interface interface {ethernet port |
port-channel id| vlan id}
Console(config-if)# 4-169
VLAN vlan database Console(config-vlan) 4-229
MSTP spanning-tree
mst-configuration
Console(config-mstp)# 4-212