![](http://pdfasset.owneriq.net/5/87/5875d4be-282b-42bc-b125-337cedb21b7d/5875d4be-282b-42bc-b125-337cedb21b7d-bg1b6.png)
C
OMMAND
L
INE
I
NTERFACE
4-148
match access-list mac
This command changes the IEEE 802.1p priority of a Layer 2 frame
matching the defined ACL rule. (This feature is commonly referred to as
ACL packet marking.) Use the no form to remove the ACL marker.
Syntax
match access-list mac acl_name set priority priority
no match access-list mac acl_name
• acl_name – Name of the ACL. (Maximum length: 16 characters)
• priority – Class of Service value in the IEEE 802.1p priority tag.
(Range: 0-7; 7 is the highest priority)
Default Setting
None
Command Mode
Interface Configuration (Ethernet Ports 1-8)
Command Usage
You must configure an ACL mask before you can change frame
priorities based on an ACL rule.
Example
Related Commands
show marking (4-136)
Console(config)#interface ethernet 1/12
Console(config-if)#match access-list mac a set priority 0
Console(config-if)#