![](http://pdfasset.owneriq.net/5/87/5875d4be-282b-42bc-b125-337cedb21b7d/5875d4be-282b-42bc-b125-337cedb21b7d-bg236.png)
C
OMMAND
L
INE
I
NTERFACE
4-276
Command Usage
The switch must use IGMPv2 for this command to take effect.
Example
The following shows how to configure the default timeout to 300 seconds:
Related Commands
ip igmp snooping version (4-269)
Static Multicast Routing Commands
ip igmp snooping vlan mrouter
This command statically configures a multicast router port. Use the no
form to remove the configuration.
Syntax
[no] ip igmp snooping vlan vlan-id mrouter interface
• vlan-id - VLAN ID (Range: 1-4094)
• interface
• ethernet unit/port
- unit - This is unit 1.
- port - Port number. (Range: 1-8)
• port-channel channel-id (Range: 1-4)
Default Setting
No static multicast router ports are configured.
Console(config)#ip igmp snooping router-port-expire-time 300
Console(config)#
Table 4-71 Static Multicast Routing Commands
Command Function Mode Page
ip igmp snooping
vlan mrouter
Adds a multicast router port GC 4-276
show ip igmp
snooping mrouter
Shows multicast router ports PE 4-277