SMC Networks SMC8708L2 Switch User Manual


 
C
OMMAND
L
INE
I
NTERFACE
4-232
Related Commands
show vlan (4-239)
Configuring VLAN Interfaces
interface vlan
This command enters interface configuration mode for VLANs, which is
used to configure VLAN parameters for a physical interface.
Syntax
interface vlan vlan-id
vlan-id - ID of the configured VLAN. (Range: 1-4094, no leading
zeroes)
Default Setting
None
Table 4-57 Configuring VLAN Interfaces
Command Function Mode Page
interface vlan Enters interface configuration mode for
a specified VLAN
IC 4-232
switchport mode Configures VLAN membership mode
for an interface
IC 4-233
switchport
acceptable-frame-types
Configures frame types to be accepted
by an interface
IC 4-234
switchport
ingress-filtering
Enables ingress filtering on an interface IC 4-235
switchport native vlan Configures the PVID (native VLAN) of
an interface
IC 4-236
switchport allowed
vlan
Configures the VLANs associated with
an interface
IC 4-237
switchport gvrp Enables GVRP for an interface IC 4-249
switchport forbidden
vlan
Configures forbidden VLANs for an
interface
IC 4-238
switchport priority
default
Sets a port priority for incoming
untagged frames
IC 4-254