![](http://pdfasset.owneriq.net/5/87/5875d4be-282b-42bc-b125-337cedb21b7d/5875d4be-282b-42bc-b125-337cedb21b7d-bg232.png)
C
OMMAND
L
INE
I
NTERFACE
4-272
IGMP Query Commands (Layer 2)
ip igmp snooping querier
This command enables the switch as an IGMP querier. Use the no form to
disable it.
Syntax
[no] ip igmp snooping querier
Default Setting
Enabled
Command Mode
Global Configuration
Command Usage
If enabled, the switch will serve as querier if elected. The querier is
responsible for asking hosts if they want to receive multicast traffic.
Example
Table 4-70 IGMP Query Commands (Layer 2)
Command Function Mode Page
ip igmp snooping
querier
Allows this device to act as the querier
for IGMP snooping
GC 4-272
ip igmp snooping
query-count
Configures the query count GC 4-273
ip igmp snooping
query-interval
Configures the query interval GC 4-274
ip igmp snooping
query-max-response-ti
me
Configures the report delay GC 4-274
ip igmp snooping
router-port-expire-time
Configures the query timeout GC 4-275
Console(config)#ip igmp snooping querier
Console(config)#