SMC Networks SMC8708L2 Switch User Manual


 
IP I
NTERFACE
C
OMMANDS
4-281
Example
The following example defines a default gateway for this device:
Related Commands
show ip redirects (4-282)
ip dhcp restart
This command submits a BOOTP or DCHP client request.
Default Setting
None
Command Mode
Privileged Exec
Command Usage
This command issues a BOOTP or DHCP client request for any IP
interface that has been set to BOOTP or DHCP mode via the ip
address command.
DHCP requires the server to reassign the client’s last address if
available.
If the BOOTP or DHCP server has been moved to a different domain,
the network portion of the address provided to the client will be based
on this new domain.
Example
In the following example, the device is reassigned the same address
Console(config)#ip default-gateway 10.1.1.254
Console(config)#
Console(config)#interface vlan 1
Console(config-if)#ip address dhcp
Console(config-if)#end
Console#ip dhcp restart
Console#show ip interface
IP interface vlan
IP address and netmask: 10.1.0.54 255.255.255.0 on VLAN 1,
and address mode: Dhcp.
Console#