Filter
Top Products
P
ORT
C
ONFIGURATION
3-121
CLI – This examples assigns an IP and MAC ingress ACL to port 1, and
an IP ingress ACL to port 2.
Port Configuration
Displaying Connection Status
You can use the Port Information or Trunk Information pages to display
the current connection status, including link state, speed/duplex mode,
and auto-negotiation.
Field Attributes (Web)
• Port – Port number.
• Name – Interface label.
• Type – Indicates the port type. (10G)
• Admin Status – Shows if the interface is enabled or disabled.
• Oper Status – Indicates if the link is Up or Down.
• Speed Duplex Status – Shows the current speed and duplex mode.
(10Gfull)
• Flow Control Status
7
– Indicates the type of flow control currently in
use. (IEEE 802.3x, Back-Pressure or None)
• Autonegotiation – Shows if auto-negotiation is enabled for disabled.
(This setting is fixed at “Disabled” for all 10G ports.)
• Trunk Member
8
– Shows if port is a trunk member.
Console(config)#interface ethernet 1/1 4-170
Console(config-if)#ip access-group david in 4-132
Console(config-if)#mac access-group jerry in 4-145
Console(config-if)#exit
Console(config)#interface ethernet 1/2
Console(config-if)#ip access-group david in
Console(config-if)#
7. There are interoperability problems between Flow Control and Head-of-Line (HOL) blocking for the
switch ASIC; Flow Control is therefore not supported for this switch.
8. Port Information only.