![](http://pdfasset.owneriq.net/5/87/5875d4be-282b-42bc-b125-337cedb21b7d/5875d4be-282b-42bc-b125-337cedb21b7d-bg1c6.png)
C
OMMAND
L
INE
I
NTERFACE
4-164
Command Mode
Global Configuration
Command Usage
• A group sets the access policy for the assigned users.
• When authentication is selected, the MD5 or SHA algorithm is used as
specified in the
snmp-server user command.
• When privacy is selected, the DES 56-bit algorithm is used for data
encryption.
• For additional information on the notification messages supported by
this switch, see
“Supported Notification Messages” on page 3-67. Also,
note that the authentication, link-up and link-down messages are legacy
traps and must therefore be enabled in conjunction with the
snmp-server enable traps
command (page 4-158).
Example
show snmp group
Four default groups are provided – SNMPv1 read-only access and read/
write access, and SNMPv2c read-only access and read/write access.
Command Mode
Privileged Exec
Console(config)#snmp-server group r&d v3 auth write daily
Console(config)#