SMC Networks SMC8708L2 Switch User Manual


 
C
OMMAND
G
ROUPS
4-13
Mirror Port Mirrors data to another port for analysis without
affecting the data passing through or the performance
of the monitored port
4-182
Rate Limiting Controls the maximum rate for traffic transmitted or
received on a port
4-184
Link Aggregation Statically groups multiple ports into a single logical
trunk; configures Link Aggregation Control Protocol
for port trunks
4-185
Address Table Configures the address table for filtering specified
addresses, displays current entries, clears the table, or
sets the aging time
4-198
Spanning Tree Configures Spanning Tree settings for the switch 4-204
VLANs Configures VLAN settings, and defines port
membership for VLAN groups; also enables or
configures private VLANs and protocol VLANs
4-229
GVRP and
Bridge Extension
Configures GVRP settings that permit automatic
VLAN learning; shows the configuration for the
bridge extension MIB
4-247
Priority Sets port priority for untagged frames, selects strict
priority or weighted round robin, relative weight for
each priority queue, also sets priority for TCP/UDP
traffic types, IP precedence, and DSCP
4-252
Multicast Filtering Configures IGMP multicast filtering, query
parameters, and specifies ports attached to a multicast
router
4-267
IP Interface Configures the IP address and gateway for
management access
4-278
DNS Configures DNS services. 4-284
Table 4-4 Command Group Index (Continued)
Command Group Description Page