Filter
Top Products
S
YSTEM
M
ANAGEMENT
C
OMMANDS
4-83
show system
This command displays system information.
Default Setting
None
Command Mode
Normal Exec, Privileged Exec
Command Usage
• For a description of the items shown by this command, refer to
“Displaying System Information” on page 3-14.
• The POST results should all display “PASS.” If any POST test
indicates “FAIL,” contact your distributor for assistance.
Example
Console#show system
System description: 8*10GE L2 Switch
System OID string: 1.3.6.1.4.1.202.20.47
System information
System Up time: 0 days, 1 hours, 23 minutes, and 44.61 seconds
System Name : [NONE]
System Location : [NONE]
System Contact : [NONE]
MAC Address (Unit1) : 00-30-F1-D4-73-A0
Web Server : enable
Web Server port : 80
Web Secure server : enable
Web Secure Server Sort : 443
Telnet Server : enable
Telnet Port : 23
Jumbo Frame : Disabled
POST result
DUMMY Test 1 ................. PASS
UART Loopback Test ........... PASS
DRAM Test .................... PASS
Timer Test ................... PASS
PCI Device 1 Test ............ PASS
I2C Bus Initialization ....... PASS
Switch Int Loopback Test ..... PASS
Console#