SMC Networks SMC8708L2 Switch User Manual


 
A
CCESS
C
ONTROL
L
IST
C
OMMANDS
4-119
IP ACL, Egress IP ACL, Ingress MAC ACL or Egress MAC ACL), but a
mask can be bound to up to four ACLs of the same type.
IP ACLs
Table 4-33 Access Control List Commands
Command Groups Function Page
IP ACLs Configures ACLs based on IP addresses, TCP/
UDP port number, protocol type, and TCP control
code
4-119
MAC ACLs Configures ACLs based on hardware addresses,
packet format, and Ethernet type
4-137
ACL Information Displays ACLs and associated rules; shows ACLs
assigned to each port
4-149
Table 4-34 IP ACL Commands
Command Function Mode Page
access-list ip Creates an IP ACL and enters
configuration mode for standard or
extended IP ACLs
GC 4-120
access-list ip
extended
fragment-auto-m
ask
Automatically creates extra masks to
support fragmented ACL entries
GC 4-120
permit, deny Filters packets matching a specified source
IP address
STD-ACL 4-122
permit, deny Filters packets meeting the specified
criteria, including source and destination
IP address, TCP/UDP port number,
protocol type, and TCP control code
EXT-ACL 4-123
show ip
access-list
Displays the rules for configured IP ACLs PE 4-126
access-list ip
mask-precedence
Changes to the IP Mask mode used to
configure access control masks
GC 4-126
mask Sets a precedence mask for the ACL rules IP-Mask 4-128