SMC Networks SMC8708L2 Switch User Manual


 
GVRP
AND
B
RIDGE
E
XTENSION
C
OMMANDS
4-247
GVRP and Bridge Extension Commands
GARP VLAN Registration Protocol defines a way for switches to
exchange VLAN information in order to automatically register VLAN
members on interfaces across the network. This section describes how to
enable GVRP for individual interfaces and globally for the switch, as well
as how to display default configuration settings for the Bridge Extension
MIB.
bridge-ext gvrp
This command enables GVRP globally for the switch. Use the no form to
disable it.
Syntax
[no] bridge-ext gvrp
Default Setting
Disabled
Command Mode
Global Configuration
Table 4-61 GVRP and Bridge Extension Commands
Command Function Mode Page
bridge-ext gvrp Enables GVRP globally for the switch GC 4-247
show bridge-ext Shows the global bridge extension
configuration
PE 4-248
switchport gvrp Enables GVRP for an interface IC 4-249
switchport forbidden
vlan
Configures forbidden VLANs for an
interface
IC 4-238
show gvrp
configuration
Displays GVRP configuration for the
selected interface
NE, PE 4-249
garp timer Sets the GARP timer for the selected
function
IC 4-250
show garp timer Shows the GARP timer for the selected
function
NE, PE 4-251