SMC Networks SMC8708L2 Switch User Manual


 
B
ASIC
C
ONFIGURATION
3-25
Web – Click System, Jumbo Frames. Enable or disable support for jumbo
frames, and click Apply.
Figure 3-8 Configuring Support for Jumbo Frames
CLI – This example enables jumbo frames globally for the switch.
Managing Firmware
You can upload/download firmware to or from a TFTP server, or copy
files to and from switch units in a stack. By saving runtime code to a file on
a TFTP server, that file can later be downloaded to the switch to restore
operation. You can also set the switch to use new firmware without
overwriting the previous version. You must specify the method of file
transfer, along with the file type and file names as required.
Command Attributes
File Transfer Method – The firmware copy operation includes these
options:
- file to file
– Copies a file within the switch directory, assigning it a new
name.
- file to tftp
– Copies a file from the switch to a TFTP server.
-tftp to file
– Copies a file from a TFTP server to the switch.
- file to unit
2
– Copies a file from this switch to another unit in the stack.
- unit to file
2
– Copies a file from another unit in the stack to this switch.
TFTP Server IP Address – The IP address of a TFTP server.
File Type – Specify opcode (operational code) to copy firmware.
Console(config)#jumbo frame 4-85
Console(config)#
2. Stacking is not supported by this switch.