SMC Networks SMC8708L2 Switch User Manual


 
VLAN C
OMMANDS
4-229
show spanning-tree mst configuration
This command shows the configuration of the multiple spanning tree.
Command Mode
Privileged Exec
Example
VLAN Commands
A VLAN is a group of ports that can be located anywhere in the network,
but communicate as though they belong to the same physical segment.
This section describes commands used to create VLAN groups, add port
members, specify how VLAN tagging is used, and enable automatic
VLAN registration for the selected interface.
Console#show spanning-tree mst configuration
Mstp Configuration Information
--------------------------------------------------------------
Configuration name: R&D
Revision level:0
Instance Vlans
--------------------------------------------------------------
1 2
Console#
Table 4-55 VLAN Commands
Command Groups Function Page
Editing VLAN
Groups
Sets up VLAN groups, including name, VID and
state
4-230
Configuring VLAN
Interfaces
Configures VLAN interface parameters, including
ingress and egress tagging mode, ingress filtering,
PVID, and GVRP
4-232
Displaying VLAN
Information
Displays VLAN groups, status, port members, and
MAC addresses
4-239
Configuring Private
VLANs
Configures private VLANs, including uplink and
downlink ports
4-240
Configuring
Protocol VLANs
Configures protocol-based VLANs based on frame
type and protocol
4-242