C
ONFIGURING
THE
S
WITCH
3-126
• Trunk – Indicates if a port is a member of a trunk. To create trunks
and select port members, see “Creating Trunk Groups” on page 3-127.
Note: Auto-negotiation must be disabled before you can configure or
force the interface to use the Speed/Duplex Mode.
Web – Click Port, Port Configuration or Trunk Configuration. Modify the
required interface settings, and click Apply.
Figure 3-52 Port - Port Configuration
CLI – Select the interface, and then enter the required settings.
Console(config)#interface ethernet 1/8 4-170
Console(config-if)#description RD SW#8 4-170
Console(config-if)#shutdown 4-174
.
Console(config-if)#no shutdown
Console(config-if)#no negotiation 4-172
Console(config-if)#speed-duplex 100half 4-171
.
Console(config-if)#negotiation
Console(config-if)#capabilities 100half 4-173
Console(config-if)#capabilities 100full