![](http://pdfasset.owneriq.net/5/87/5875d4be-282b-42bc-b125-337cedb21b7d/5875d4be-282b-42bc-b125-337cedb21b7d-bga8.png)
C
ONFIGURING
THE
S
WITCH
3-116
Web – Configure the mask to match the required rules in the IP ingress or
egress ACLs. Set the mask to check for any source or destination address, a
specific host address, or an address range. Include other criteria to search
for in the rules, such as a protocol type or one of the service types. Or use
a bitmask to search for specific protocol port(s) or TCP control code(s).
Then click Add.
Figure 3-48 ACL Mask Configuration - IP