SNMP C
OMMANDS
4-151
snmp-server
This command enables the SNMPv3 engine and services for all
management clients (i.e., versions 1, 2c, 3). Use the no form to disable the
server.
Syntax
[no] snmp-server
Default Setting
Enabled
Command Mode
Global Configuration
Example
snmp-server enable
traps
Enables the device to send SNMP traps
(i.e., SNMP notifications)
GC 4-158
snmp-server
engine-id
Sets the SNMP engine ID GC 4-159
show snmp
engine-id
Shows the SNMP engine ID PE 4-160
snmp-server view Adds an SNMP view GC 4-161
show snmp view Shows the SNMP views PE 4-162
snmp-server group Adds an SNMP group, mapping users to
views
GC 4-163
show snmp group Shows the SNMP groups PE 4-164
snmp-server user Adds a user to an SNMP group GC 4-166
show snmp user Shows the SNMP users PE 4-168
Console(config)#snmp-server
Console(config)#
Table 4-39 SNMP Commands (Continued)
Command Function Mode Page