![](http://pdfasset.owneriq.net/5/87/5875d4be-282b-42bc-b125-337cedb21b7d/5875d4be-282b-42bc-b125-337cedb21b7d-bg1b4.png)
C
OMMAND
L
INE
I
NTERFACE
4-146
Example
Related Commands
mac access-group (4-145)
map access-list mac
This command sets the output queue for packets matching an ACL rule.
The specified CoS value is only used to map the matching packet to an
output queue; it is not written to the packet itself. Use the no form to
remove the CoS mapping.
Syntax
[no] map access-list mac acl_name cos cos-value
• acl_name – Name of the ACL. (Maximum length: 16 characters)
• cos-value – CoS value. (Range: 0-7)
Default Setting
None
Command Mode
Interface Configuration (Ethernet Ports 1-8)
Command Usage
• You must configure an ACL mask before you can map CoS values to
the rule.
• By default, a packet matching a rule within the specified ACL is
mapped to one of the output queues as shown below.
Console#show mac access-group
Interface ethernet 1/5
MAC access-list M5 out
Console#
Table 4-37 Mapping CoS Values to MAC ACLs
Priority
0 1 2 3 4 5 6 7
Queue
1 2 0 3 4 5 6 7