SMC Networks SMC8708L2 Switch User Manual


 
C
OMMAND
L
INE
I
NTERFACE
4-204
Spanning Tree Commands
This section includes commands that configure the Spanning Tree
Algorithm (STA) globally for the switch, and commands that configure
STA for the selected interface.
Table 4-54 Spanning Tree Commands
Command Function Mode Page
spanning-tree Enables the spanning tree protocol GC 4-205
spanning-tree mode Configures STP, RSTP or MSTP mode GC 4-206
spanning-tree
forward-time
Configures the spanning tree bridge
forward time
GC 4-208
spanning-tree
hello-time
Configures the spanning tree bridge hello
time
GC 4-209
spanning-tree
max-age
Configures the spanning tree bridge
maximum age
GC 4-209
spanning-tree priority Configures the spanning tree bridge
priority
GC 4-210
spanning-tree
path-cost
method
Configures the path cost method for
RSTP/MSTP
GC 4-211
spanning-tree
transmission-limit
Configures the transmission limit for
RSTP/MSTP
GC 4-212
spanning-tree
mst-configuration
Changes to MSTP configuration mode GC 4-212
mst vlan Adds VLANs to a spanning tree instance MST 4-213
mst priority Configures the priority of a spanning tree
instance
MST 4-214
name Configures the name for the multiple
spanning tree
MST 4-215
revision Configures the revision number for the
multiple spanning tree
MST 4-216
max-hops Configures the maximum number of
hops allowed in the region before a
BPDU is discarded
MST 4-216