Filter
Top Products
190
Setup
Chapter 1 MVS-8000 Functions
The following software options are also required depending on the number of
M/E banks.
To use the software, you are required to input an install key.
For the method of inputting an install key, see “Installation and Device Setup
(Install/Unit Config Menu)” in Chapter 16 (Volume 2).
Format converter (for MVS-8000G only)
Installing the MKS-8450G Format Converter Board in the switcher enables the
following signal video format conversions.
• Up-conversion: from SD (4:3) to HD (16:9)
• Down-conversion: from HD (16:9) to SD (4:3)
• Cross-conversion: from HD (720P) to HD (1080i), or from HD (1080i) to
HD (720P)
The maximum number of input signals for which format conversion is possible
is 16 (or 8 when only one MKS-8450G board is installed), and the maximum
number of output signals is 4 (2 for output on the MVS-8000GSF).
Notes
• After format conversion, input and output signals have one-frame delays
with respect to the reference signals.
• It is not possible to apply the safe title function to output signals subjected to
format conversion.
• When the input reference signal for HD system is set to Tri Sync, the format
converter function is not available.
For details, see “Setting the Signal Format (Format Menu)” in Chapter 16
(Volume 2).
Format combinations allowing conversion
The supported combinations of switcher signal format and format converter
(inputs 1 to 8 and inputs 9 to 16) are as follows.
Product name Model No. Switcher
Switcher Upgrade
Software
BZS-8500M MVS-8000G
BZS-8510M MVS-8000GSF
Product name Model No. Switcher
Mix/Effect
Upgrade Software
BZS-8520M MVS-8000GSF 2M/E system or
MVS-8000G 3M/E system
BZS-8520M and BZS-8530M MVS-8000G 4M/E system