Filter
Top Products
442
Basic Procedure for Wipe Settings
Chapter 5 Wipes
2
In the same way as for the main pattern, select the sub pattern.
The patterns that can be selected for the sub pattern depend on the pattern
selected for the main pattern (see the following table).
Possible combinations of main pattern and sub pattern
Yes: Combination possible No: Combination not possible
3
Select HF2 ‘Pattern Mix.’
The Pattern Mix menu appears.
4
In the <Pattern Mix> group, select the type of pattern mix.
Mix: mix
+Nam: positive Nam
–Nam: negative Nam
Morphing: morphing
For an overview of types of pattern mix, see page 61.
5
Depending on the selection in step 4, set the following parameters.
• When mix, positive Nam, or negative Nam is selected
• When morphing (see page 61) is selected
Main
pattern
Sub pattern
Standard Enhanced Rotary Mosaic Random/
diamond
dust
Standard Ye s Ye s N o Ye s Ye s
Enhanced Ye s Ye s N o Ye s Ye s
Rotary No No No No No
Mosaic Yes Yes No No Yes
Random/
diamond
dust
Ye s Ye s N o Ye s No
Knob Parameter Adjustment Setting values
1 Mix Ratio Proportion of sub pattern to the
main pattern
0.00 to 100.00
Knob Parameter Adjustment Setting values
2 Start Point in transition at which main
pattern is at 100%
–50.00 to +150.00
3 End Point in transition at which sub
pattern is at 100%
–50.00 to +150.00