Filter
Top Products
545Basic Copy and Swap Operations
Chapter 9 Copy and Swap
Key Wipe: The operation applies to wipes in the independent key
transition control block.
3
Using any of the following methods, select the data to be copied or
swapped.
• Press directly on the list in the status area.
• Press the arrow keys to scroll the reverse video cursor.
• Turn the knobs to make the setting.
a) Transition control block wipe data
b) Independent key transition control block wipe data
For details of the data affected, see “Copy and Swap” (page 98).
4
To copy, press [Copy], and to swap, press [Swap].
This carries out the copy or swap.
To undo a copy or swap
Press [Undo], to return to the state before the copy or swap was carried out.
Copy by Button Operation
You can carry out the following copy operations by a simple button operation.
• M/E copy
• Keyer copy
• Wipe copy
• DME wipe copy
For an overview of the copy function, see “Copy and Swap” (page 98).
Basic button operation
The basic button operation is to hold down the copy source button, then press
the destination button.
You can undo the last operation using [Undo] in the menu (see page 545).
Knob Parameter Adjustment Setting values
1 Left No Select data for copy/swap
source
1 to 4
a)
1 to 16
b)
2 Right No Select data for copy/swap
destination
1 to 4
a)
1 to 16
b)