Filter
Top Products
351Executing a Transition
Chapter 3 Transitions
Executing a Transition
There are two ways of executing a transition: as an auto transition by a button
operation, and as a manual transition using the fader lever. You can also use a
combination of these two modes.
For an overview of the auto transitions and manual transitions, see “Executing
a Transition” (page 44).
Transition Indicator Function
In each of the M/E banks and PGM/PST bank, to the left of the fader lever is a
transition indicator composed of multiple LEDs. This indicator shows the state
of the transition, whether auto or manual, by which LEDs are lit.
Transition indicator
For example, in the previous illustration, it can be seen that the transition is
more than half completed.
When the transition is completed, all of the LEDs go off.
Lit