Sony 8000SF Switch User Manual


 
450
Basic Procedure for Wipe Settings
Chapter 5 Wipes
Rotating the wipe pattern (Rotation)
You can apply rotation independently to the main pattern and sub pattern.
1
In the M/E-1 >Wipe menu, select HF5 ‘Main Modify.’
The Main Modify menu appears.
2
In the <Rotation> group, select the rotation type.
Angle: Incline the pattern through a fixed angle.
Speed: Rotate at a fixed rate.
Magnitude: Rotate through a particular angle during the course of the
transition.
For an overview of the rotation, see page 65.
3
According to the selection in step 2, set the following parameters.
When Angle is selected
a) See page 66.
When Speed is selected
a) See page 66.
When Magnitude is selected
a) See page 67.
Setting the wipe pattern aspect ratio (Aspect ratio)
You can set the aspect ratio independently for the main pattern and sub pattern.
1
In the M/E-1 >Wipe menu, select HF5 ‘Main Modify.’
The Main Modify menu appears.
Knob Parameter Adjustment Setting values
1 Angle Angle of pattern rotation
–100.00 to +100.00
a)
Knob Parameter Adjustment Setting values
1 Speed Rotation rate of pattern
–100.00 to +100.00
a)
Knob Parameter Adjustment Setting values
1 Angle Angle of pattern rotation at start of
transition
–100.00 to +100.00
a)
2 Magnitude Angle of rotation through course
of transition
–200.00 to +200.00
a)