Filter
Top Products
439Basic Procedure for Wipe Settings
Chapter 5 Wipes
Enhanced: enhanced wipes
Rotary: rotary wipes
Mosaic1 to Mosaic3: mosaic wipes
Random/Dust: random/diamond dust wipes
The patterns from the selected pattern group appear on the screen.
For details of wipe patterns, see “Types of Wipe Pattern” (page 60) and
“Wipe Pattern List” in Appendix (Volume 1) (page 560).
3
Press the button to select the desired pattern.
4
The parameters change according to the selected pattern, and you can
adjust the pattern.
• When a polygon wipe is selected (pattern number 49)
a) A value of –100.00 completely removes the star “rays,” leaving a circle; at +100.00 the
“rays” are at their sharpest.
• When a mosaic wipe is selected (pattern numbers 200 to 203, 206 to
213, 224 to 247, 250 to 257, 260 to 269)
• When a karaoke wipe is selected (pattern numbers 220 to 223)
a) At –100.00 tiles appear from the top (or left edge) of the screen; at +100.00 from the
bottom (or right edge) of the screen.
b) At –100.00 all rows appear simultaneously; at +100.00 until one row of tiles is completely
displayed, the next row does not start to appear.
• When a random wipe is selected (pattern number 273)
Knob Parameter Adjustment Setting values
1 No Number of points 3 to 64
2 Star Rate Angularity of star
–100.00 to +100.00
a)
Knob Parameter Adjustment Setting values
1 H Tile No Number of tiles horizontally 2 to 36
2 V Tile No Number of tiles vertically 2 to 18
Knob Parameter Adjustment Setting values
1 Start Position of start tile
–100.00 to +100.00
a)
2 Row No Number of rows of tiles 1 to 36
3 Phase Delay for next row
–100.00 to +100.00
b)
Knob Parameter Adjustment Setting values
1 H Size Tile width 0.00 to 100.00