Filter
Top Products
467Basic Procedure for DME Wipe Settings
Chapter 6 DME Wipes
Selecting a DME wipe pattern by a menu operation
1
In the M/E-1 >DME Wipe menu, select HF1 ‘1ch’ for one-channel mode,
HF2 ‘2ch’ for two-channel mode or HF3 ‘3ch’ for three-channel mode.
2
Select the desired DME wipe pattern group with one of the following
buttons.
• Slide/Squeeze: slide and squeeze
• Split/Door: split and door
• Flip Tumble: flip tumble
• Mirror/Sphere: mirror and sphere
• Character Trail: character trail
• Wave/Ripple: wave and ripple
• Page Turn/Roll: page turn and page roll
• Frame I/O/PinP: frame in/out and picture-in-picture
• 2D Trans/3D Trans: 2D trans and 3D trans
• Sparkle/Split Slide: sparkle and split slide
• Mosaic/Defocus: mosaic and defocus
• Brick: brick
• User Program: user programmable DME
Selectable DME wipe pattern groups in one-channel mode: All of the
above groups except for Brick.
Selectable DME wipe pattern groups in two-channel mode: Slide/
Squeeze, Page Turn/Roll, Frame I/O, PinP, 3D Trans, Brick and User
Program.
Selectable DME wipe pattern groups in three-channel mode: User
Program and Brick.
For details of DME wipe patterns, see “Types of DME Wipe Pattern”
(page 72) and “DME Wipe Pattern List” in Appendix (Volume 1) (page
566).
The patterns from the selected pattern group appear on the screen.
3
Press the button to select the desired pattern.
Note
For a key transition, the page turn, page roll and picture-in-picture cannot
be used.
Adjusting DME wipe pattern parameters
Of the DME wipe patterns, the following have parameters that can be adjusted.