Filter
Top Products
509Still Image Operations
Chapter 7 Frame Memory
The signals of frame memory source buses 1 and 2 are assigned to the pair
of FMs selected in step 2, the recording function is now possible.
6
Input the file name if required.
Pressing [File Name] displays the keyboard window and you can enter the
first character string (up to four characters) of the file name.
7
Set the recording time if required.
Pressing [Duration] displays the numeric keypad window, in which you
can enter the recording time in the form of timecode.
If you set the recording time to zero, this uses all frame memory in which
storing is possible for recording.
8
If required, set video processing for the selected signal.
For details of the operating procedures, see “Setting video processing”
(page 498).
9
Press [Record], to start recording.
When the recording time is set, recording stops once the time has elapsed.
10
Press [Stop] to stop recording.
Even if the recording time is set, you can still stop recording before the set
time has elapsed.
Recalling a Continuous Sequence of Still Images
(Animation)
To recall a continuous sequence of still images, create an effect in the user
region with the still image files as a keyframe, and run the created effect.
Note
With the 720P format, you can continuously recall images using the frame
memory in units of two frames only.
Creating an effect with still image files as a keyframe
1
In the Frame Memory menu, select VF1 ‘Still’ and HF5 ‘Create Key
Frame.’
The Create Key Frame menu appears.