Filter
Top Products
MTM400 Configuration Files
3-86 MTM400 MPEG Transport Stream Monitor User Manual
You can modify the active parameters during normal operation; these changes will
only affect the active configuration. The active configuration is saved in
non-volatile RAM as operational changes are made and will be recovered after the
unit is reset or powered off.
The active configuration settings can also be saved to any of the storage slots. The
contents of a storage slot can subsequently be downloaded to a file on a remote,
networked PC. Similarly, a correctly configured file (or portion of a file) can be
uploaded into any slot; where a 'portion of a file' can be a correctly configured
XML file which specifies a subset of the total configuration file.
The default names allotted to the slots are Slot 1 to Slot 8; they are always
displayed in the same order. When a configuration file occupies the slot, the name
is changed to that of the configuration file; however, the position of the slot in the
list remains the same.
Activating a Slot
For the settings stored in a slot to become active, the contents of a storage slot
must be transferred to the active configuration.
1. From the Configuration view, select Select Slot….
2. From the list, select the required slot.
3. Select OK.
The settings stored in the selected slot will be copied to the active configuration.