Filter
Top Products
Device View
3-6 MTM400 MPEG Transport Stream Monitor User Manual
Time Zone
Monitoring devices across time zones may cause some confusion with respect to
the timing of events. The displayed times at which log events occurred can be
adjusted by making a selection from the Time Zone drop-down list at the top of
the window. The following options are available:
Local The time local to the machine on which MTM400 Remote User
Interface is currently running.
UTC Universal Coordinated Time.
RTM Device The time local to the RTM device being monitored.
Device Configuration
The Device Configuration screen allows you to configure items specific to the
MTM400 unit being monitored.
Figure 3-4: Device view - Configuration
Device Type
: Displays the monitoring device type; this information is read
from the unit being monitored.
Device Name
: You can give the monitoring device a name, which is then
displayed in the title bar of all screens. You need not enter a
Device Name if the IP address of the device is displayed.
Enter the required name and select Set to activate it.
Network Settings…
Allows the network settings of the device to be reconfigured.
(See Network Settings, page 3-7.)