Filter
Top Products
Scheduling
MTM400 MPEG Transport Stream Monitor User Manual 3-97
-480 minutes
(8hrs before UTC)
-420 minutes
(7hrs before UTC)
-360 minutes
(6hrs before UTC)
-300 minutes
(5hrs before UTC)
With Schedule 'UTC
Offset' attribute set to
'Local'
With Schedule 'UTC
Offset' attribute set to
-360 minutes
13:00 schedule time
= 21:00 UTC
13:00 schedule time
= 20:00 UTC
13:00 schedule time
= 19:00 UTC
13:00 schedule time
= 18:00 UTC
13:00 schedule time
= 19:00 UTC
13:00 schedule time
= 19:00 UTC
13:00 schedule time
= 19:00 UTC
13:00 schedule time
= 19:00 UTC
USA (Part)
Time Zones
UTC to Local Time
Zone Offset
(MTM400
Configuration -
Set Time dialog)
UTC = Universal Co-ordinated Time
Figure 3-36: Scheduling and time zones
For example, if ‘UTC Offset’ is set to 60, then schedule times defined are one hour
ahead of UTC. This means that if a schedule time of 11:00 is specified, the
appropriate configuration should be loaded at 11:00 - 60 minutes = 10:00 UTC.
This method of operation is useful where there are multiple RTM devices
monitoring a transmission chain that spans several time zones, and configurations
that check features of the transport stream have to be loaded by each RTM device
at the same instant in time.