Filter
Top Products
Device View
MTM400 MPEG Transport Stream Monitor User Manual 3-3
Typical display elements are described in the following paragraphs:
State A button showing the State of the event.
(See Color Coding, page 2-11.)
A right-click on the button will open a popup menu that allows
you to reset the error or enable/disable the event monitoring.
Double-clicking the button will toggle event monitoring
between enabled and disabled.
Error Name of the Error event (for example, Fan).
Alm An icon indicating whether an audible alarm (Alm) will sound
when an error of the type occurs. Double-clicking the icon will
toggle its state: enabled or disabled.
- Disabled; - Enabled
(See the MTM400 MPEG Test Technical Reference for
additional details.)
TTLn An icon indicating whether the TTL (TTLn) will activate
when an error occurs. Double-clicking the icon will toggle its
state: enabled or disabled.
- Disabled; - Enabled
(See the MTM400 MPEG Test Technical Reference for
additional details.)
SNMP (T- and T+) Indicates whether SNMP trap messages should
be sent when a specific event starts and finishes.
- Off (gray); - On (yellow)
RLYn An icon indicating whether the relay (RLYn) will activate
when an error occurs. Double-clicking the icon will toggle its
state: enabled or disabled.
- Disabled; - Enabled
(See the MTM400 MPEG Test Technical Reference for
additional details.)