Filter
Top Products
4 SYSTEM FUNCTIONS
118 Mailbox Communication
When the relay end terminal specified
has been already registered:
Since the screen on the right appears,
select the desired item using the or
button and press the [ENTER] but-
ton.
[1. DELETE]:
To delete the relay end terminal specified.
→ go to step 7.
[2. RETAIN]:
To register the relay end terminal speci-
fied.
→ go to step 3.
10
When registering all the
relay end terminals, select
“2. COMPLETE” using the
or button and press
the [ENTER] button.
11
Enter the FAX Number of
the remote location to
which the transmission
report should be sent.
y You can confirm whether or not
transmission has succeeded by
outputting the relay transmis-
sion relay end terminal report to
the originator.
For setting up the Relay TX End
Terminal Report, see the follow-
ing page.
P.213 “To set the default set-
ting for relay TX end terminal
report”
y Keypad Dialing (Direct Entry with
Digital Keys): P.41
y One Touch Key Dialing: P.43
y Abbreviated Dialing: P. 46
y Alphabet Dialing: P.48
12
Select “1. COMPLETE”
using the or button
to complete the setting and
press the [ENTER] button.
RELAY END NUMBER
05
ONE TOUCH:
London Office
Already assigned
RELAY END NUMBER
1.DELETE
2.RETAIN
RELAY END NUMBER
05
ONE TOUCH:
London Office
Deleted
RELAY END NUMBER
1.ADD NEXT NUMBER
2.COMPLETE
TRANSMISSION REPORT
ENTER TEL NUMBER OR.
PRESS SPEED DIAL KEY
OR ONE TOUCH KEY
MAILBOX SETUP
1.COMPLETE
2.MAILBOX SETUP
3.MAILBOX DELETE