Filter
Top Products
Default Settings for Fax Functions 175
Default Settings for Fax Functions
Description of Fax Functions
When you send an original without changing the original conditions and transmission mode set-
tings, the original is sent with the default setting values.
Confirm the default setting values on the Function List. ( P.237 “Function list”)
Line monitor
This function is used to set the speaker ON in order to monitor the dialing and connection por-
tion of every transmission. This function is mainly used to confirm dialing and phone line status.
5
Press the [FAX] button to return to the Fax basic screen.
y You can press the [USER FUNCTIONS] button instead of [FAX] to exit the user func-
tions menu and return to the default mode basic screen.
P.24 “Message LCD Screen”
1
Press the [USER FUNC-
TIONS] button and select
“01. DEFAULT SETTINGS”
then press the [ENTER]
button.
y "DEFAULT SETTINGS" screen
appears.
2
Select “03. FAX SETUP”
using the or button
and press the [ENTER] but-
ton.
3
Select “01. LINE MONITOR”
using the or button
and press the [ENTER] but-
ton.
4
Select the desired function
using the or button
and press the [ENTER] but-
ton.
[1.OFF]:
Turns the monitor speaker OFF.
[2.ALWAYS]
Turns the monitor speaker ON.
* Default: [1.OFF]
USER FUNCTIONS 18
01.DEFAULT SETTINGS
02.LISTS
03.INITIAL SETUP
DEFAULT SETTINGS
01.GENERAL SETTING
02.COPY SETUP
03.FAX SETUP
FAX SETUP
01.LINE MONITOR
02.RECEIVE INTERVAL
03.ECM
LINE MONITOR
1.OFF
2.ALWAYS