Filter
Top Products
2 BASIC FUNCTIONS
54 Specifying the Remote Fax
y If the original cannot be sent because the remote FAX is busy, the remote FAX is
automatically redialed. Default values for the redial intervals and the redial count are
different depending on country/region. ( P.58 “Redialing”)
For redial interval and counters, you can set the desired value on "06. REDIAL
MODE" in the Fax Setup menu. ( P.181 “Redial mode”)
y Even when memory transmission result in error, the error tone does not sound. How-
ever, the TX report is output to inform you of the error occurrence.
y Checking and Canceling the Communications ( P.68 “Checking the Communica-
tions during Transmission”)
On-hook Transmission
In this mode, you can confirm the answering tone from the remote Fax without picking up the
handset of the external telephone.
y This operation is available when the fax communication lamp is OFF.
Each press of a digital key dials a number. If you make a mistake when dialing the
remote Fax number, press the [MONITOR] button to cut the line, and then press the
[MONITOR] button again to redial.
1
Press the [FAX] button on
the control panel.
2
Place the original(s) and
set the transmission condi-
tions.
y P.32 “When setting originals
on the glass”
y P.35 “When using the Auto-
matic Document Feeder
(optional) or Reversing Auto-
matic Document Feeder
(optional)”
y P.36 “Setting the Transmis-
sion Conditions”
3
Press the [MONITOR] but-
ton.
y You will hear the dial tone from
the built-in speaker.
y To cancel the setting, press the
[MONITOR] button again.
4
Specify the remote Fax.
y Keypad Dialing (Direct Entry with
Digital Keys): P.41
y One Touch Key Dialing: P.43
y Abbreviated Dialing: P. 46
y Alphabet Dialing: P.48
Dial tel number:
2006-04-10 13:23 M: 100%
RESOLUTION
:STANDARD