Filter
Top Products
Function Keys 83
RECOVERY TX Used to transmit a Fax without placing an original again when the Fax
was not transmitted after the specified number of redial. ( P.93
“Recovery transmission”)
SEND AFTER
SCAN
Used to select whether the dialing starts while the equipment is scanning
the documents or after the equipment has scanned all documents to
memory. ( P.100 “Send after scan”)
POLLING Used to perform polling communication. ( P.140 “Polling Communica-
tions”)
SUB ADDRESS
COMM
Used to add sub-address digits to the remote Fax number for routing or
security. ( P.96 “Transmission with sub-address”)
JOB STATUS Used to confirm status of each job or cancel a job. ( P.68 “Checking
the Communications during Transmission”)
JOURNAL Used to print out the communication journal report. ( P.216 “Transmis-
sion/Reception journal”)
PREV. TX. RPT Used to display and print the result of the latest 150 transmission jobs.
( P.69 “Checking the transmission results on the LCD screen”)
RESERVATION
LIST
Used to print out the job reservation list. ( P.229 “List to confirm the
contents stored in memory”)
SECURE RX Used to prohibit printing out the received document without entering a
certain password during a certain time period. ( P.98 “Secure recep-
tion”)
CHECK E-MAIL For details, see the Setup Guide for Scan Functions.
TX REPORT Used to print out the transmission report for a single job. ( P.220
“Reception list/Communication report”)
TEL LIST ENTRY Used to register Abbreviated, One Touch and Group Dialing numbers.
( P.161 “Entering the Remote Fax Number”)
TEL LIST PRINT Used to print out the telephone list by designating the dialing category
such as Abbreviated Dialing number or One Touch Dialing number. (
P.232 “Dialer list”)